Dell 1350CNW User Manual Download Page 278

Page: 278 / 328

274

Maintaining Your Printer

Press the button until

Admin Menu

appears, and then press the

button.

Press the button until

Maintenance

appears, and then press the

button.

Press the button until

Color Reg Adj

appears, and then press the

button.

Press the button until

Enter Number

appears, and then press the

button.

Ensure that

Enter (Y, M, C)

appears, and then press the or

button until you reach the value (for example, +3) displayed on the chart.

Press the button once and move the cursor to the next value.

Repeat steps 7 and 8 to enter all of the digits, and then press the

button.

Ensure that

Enter (LY, LM, LC)

appears.

Press the or button until you reach the value (for example, +3)

displayed on the chart.

Press the button once and move the cursor to the next value.

Repeat steps 11 and 12 to enter all of the digits, and then press the

button.

Ensure that

Enter (RY, RM, RC)

appears.

Press the or button until you reach the value (for example, +3)

displayed on the chart.

Press the button once and move the cursor to the next value.

Repeat steps 15 and 16 to enter all of the digits, and then press the

button.

Press the

(Cancel)

button.

Press the button until

Color Regi Chart

appears, and then press

the

button.

The color registration chart is printed with the new values.

Press the button.

Adjust till all straight lines are at the value of 0. Viewing the images before

and after will help.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands