Dell 1350CNW User Manual Download Page 145

Page: 145 / 328

Dell Printer Configuration Web Tool

141

NOTE:

The settings in the Port Settings page will be valid only when the printer is

rebooted. When you change or configure the settings, click the Apply new settings

button to apply new settings.

TCP/IP

Purpose:

To configure the IP address, subnet mask, and gateway address of the printer.

Values:

Ethernet

Settings

Auto

Detects Ethernet transmission

rate and the duplex settings

automatically.

10Base-T

Half-Duplex

Selects 10Base-T Half-Duplex

as the default value.

10Base-T

Full-Duplex

Selects 10Base-T Full-Duplex

as the default value.

100Base-TX

Half-Duplex

Selects 100Base-TX Half-

Duplex as the default value.

100Base-TX Full-

Duplex

Selects 100Base-TX Full-

Duplex as the default value.

Current Ethernet Settings

Displays the current settings of

Ethernet.

MAC Address

Displays the MAC address of the printer.

Port Status

LPD

Specifies whether to enable LPD.

Port9100

Specifies whether to enable Port9100.

WSD

Specifies whether to enable the WSD port.

Bonjour

(mDNS)

Specifies whether to enable the Bonjour(mDNS)

feature.

E-Mail Alert

Specifies whether to enable the

E-Mail Alert

feature.

SNMP

Specifies whether to enable the SNMP.

LLTD

Specifies whether to enable LLTD.

This item is available only when the printer is connected with a wired network.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands