Dell 1350CNW, User Manual

Page: 228 / 328

224
Understanding the Printer Menus
Enter 5 in
Sleep
to put the printer in the Sleep mode five minutes after it
finishes a job. This uses less energy, but requires more warm-up time for the
printer. Enter 5 if your printer shares an electrical circuit with room lighting
and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances,
this keeps the printer ready to operate with minimum warm-up time. Select a
value between 5 and 30 minutes for the Sleep mode if you want a balance
between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode
when it receives data from the computer. You can also return the printer to
the standby mode by pressing any button on the operator panel.
Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop
abnormally. The print job is cancelled if it times out.
Options:
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from
the computer. The print job is cancelled if it times out.
Options:
On* 60 sec.* Specifies the time taken by the printer before it
cancels jobs that stop abnormally.
3–300 sec.
Off Disables the fault time-out.
On* 30 sec.* Specifies the amount of time that the printer
waits for data to arrive from the computer.
5–300 sec.
Off Disables the job time-out.
Downloaded from ManualsPrinter.com Manuals