Dell 1350CNW User Manual Download Page 125

Page: 125 / 328

Dell Printer Configuration Web Tool

121

Printer Status

Use the

Printer Status

menu to check the status of consumables, hardware,

and specifications of the printer.
The following pages are displayed in the

Printer Status

menu.

Printer Status

Purpose:

To check the status of the consumables and trays.

Values:

"Copy Printer Settings"

"Copy Printer Settings"
"Copy Printer Settings Report"

"Print Volume"

This item is available only when the printer is connected with a wireless network.

Cyan Cartridge Level
Magenta Cartridge Level
Yellow Cartridge Level
Black Cartridge Level

Displays the percentage of toner remaining in

each toner cartridge. When a cartridge is

empty, a message appears. The text

Call or

Order

is linked to the Dell Printer Supplies

website.

Paper Trays

Status

Indicates that there is some paper in the tray

but the quantity is unknown.

Add Paper

Indicates that there is no paper in the tray.

Capacity

Displays the maximum capacity of the

output tray.

Size

Displays the size of paper in the tray.

Output Tray

Status

Indicates that the tray is available.

Capacity

Displays the maximum capacity of the

output tray.

Cover

Status

Closed

Indicates that the cover is closed.

Open

Indicates that the cover is open.

Printer Type

Displays the type of the printer.

Color Laser

is displayed normally.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands