manualshive.com logo in svg

Dell 1350CNW, User Manual

Share
Download
Dell 1350CNW User Manual Download Page 204

200

Understanding the Tool Box Menus

Reports

Purpose:

To print the settings and history information of your printer.
The reports are printed in the paper size specified in printer settings. The 

default is A4 or Letter.

Values:

TCP/IP Settings

Purpose:

To display the current settings of TCP/IP (Transmission Control Protocol/

Internet Protocol) protocol.

Values:

Auto Registration 

Adjustment

Displays whether to automatically adjust color registration.

Adjust Altitude

Displays the altitude of the location where the printer is installed.

Non-Dell Toner

Displays whether to use toner cartridge of another manufacturer.

BTR Refresh 

Mode

Displays whether to execute counter measures for curling/

separating discharge of the paper.

Printer Settings

Click to print a detailed list of the printer settings.

Device Settings

Click to print a detailed list of the device settings.

Job History

Click to print the completed jobs history.

Error History

Click to print the error history.

Color Test Page

Click to print a color test page.

IP Address Mode

Displays the method for acquiring the IP address.

IP Address

Displays the IP address of your printer.

Subnet Mask

Displays the subnet mask.

Gateway Address

Displays the gateway address.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands