Dell 1133 Mono Laser Page 84 User Manual Download

Page: 84 / 88

Printing

1. Click

Print

2.  Select the file you want to print.
3.  Select the machine you want to use for printing.
4.  Click

Print

to start the job.

Using the Linux Unified Driver Configurator

Unified Driver Configurator is a tool primarily intended for configuring machine devices. You need to install Unified
Linux Driver to use Unified Driver Configurator (See

Linux

After the driver is installed on your Linux system, the Unified Driver Configurator icon will automatically be created on
your desktop.

Opening the Unified Driver Configurator

1. Double-click the

Unified Driver Configurator

on the desktop.

You can also click the

Startup

Menu icon and select

Dell Unified Driver

Unified Driver Configurator

2. Click each button on the left to switch to the corresponding configuration window.

1.  Printers Configuration
2.  Scanners Configuration
3.  Ports Configuration

To use the on screen help, click

Help

3. After changing the configurations, click

Exit

to close the Unified Driver Configurator.

Printers configuration

has the two tabs:

Printers

and

Classes

Printers tab

View the current system’s printer configuration by clicking on the machine icon button on the left side of the
Unified Driver Configurator window.

Summary of Contents for 1133 Mono Laser

























































































Search results

Summary of Contents for 1133 Mono Laser

Reviews:

Related manuals for 1133 Mono Laser

Brands by name

Popular brands

Dell 1133 Mono Laser, User Manual

Search results

Summary of Contents for 1133 Mono Laser

Reviews:

Related manuals for 1133 Mono Laser

Brands by name

Popular brands