Dell 1133 Mono Laser Page 52 User Manual Download | Manualshive

Page: 52 / 88

background image

Supplies

This chapter provides information on purchasing supplies, accessories and maintenance parts available for your
machine.

This chapter includes:

How to purchase
Available supplies
Replacing the toner cartridge

Available accessories may differ from country to country. Contact your sales representatives to obtain the list of
available accessories.

How to purchase

To order Dell-authorized supplies and accessories visit

www.dell.com/supplies

, or contact your local Dell dealer or

the retailer where you purchased your machine. You can also visit

www.dell.com

or

support.dell.com

, select your

country/region, and obtain information on calling for service.

Available supplies

When supplies reach their lifespan, you can order the following types of supplies for your machine:

Type

Average yield

[

a

]

Part number

Standard capacity toner cartridge Approx. 1,500 pages 3J11D
High capacity toner cartridge

Approx. 2,500 pages 2MMJP

[

a

]

Declared yield value in accordance with ISO/IEC 19752.

To replace a toner cartridge see

Replacing the toner cartridge

.

Depending on the options and job mode used, the toner cartridge’s lifespan may differ.

You must purchase supplies, including toner cartridges, in the same country where you purchased your machine.
Otherwise, it will be incompatible with your machine since the system configuration of these vary from country to
country.

Dell does not recommend using non-genuine Dell toner cartridge such as refilled or remanufactured toners. Dell
cannot guarantee non-genuine Dell toner cartridge's quality. Service or repair required as a result of using non-
genuine Dell toner cartridges will not be covered under the machine warranty.

Replacing the toner cartridge

Click this link to open an animation about replacing a toner cartridge.

When a toner cartridge has reached its estimated cartridge life:

End of life Replace new cart

message appears on the display.

At this stage, the toner cartridge needs to be replaced. Check the type of the toner cartridge for your machine (See

Available supplies

).

1. Open the front door.
2. Pull the toner cartridge out.

«
...
50
51
52
53
54
...
»

Summary of Contents for 1133 Mono Laser

























































































Reviews:

No comments

Related manuals for 1133 Mono Laser

Brand: Oki Pages: 8

Brand: Oki Pages: 48

Stylus Pro 7900

Brand: X-Rite Pages: 36

Brand: Xerox Pages: 414

WorkCentre Pro 123

Brand: Xerox Pages: 4

DocuCentre SC2020

Brand: Xerox Pages: 322

Brand: Xerox Pages: 2

Brand: Xerox Pages: 8

Brand: Xerox Pages: 80

Brand: Xerox Pages: 38

WorkCentre 7132

Brand: Xerox Pages: 73

Brand: Z Corporation Pages: 99

Brand: Oki Pages: 28

Brand: Oki Pages: 22

image RUNNER 3045

Brand: Canon Pages: 14

Brand: Oki Pages: 512

Brand: Canon Pages: 36

Brand: Canon Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands