3
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module is firmly
seated in the memory module socket.
4
Run the appliance memory test in system diagnostics.
Hard drives
All hard drives connect to the system board through the hard drive backplane. Hard drives are supplied in hot swappable hard drive
carriers that fit in the hard drive slots.
CAUTION:
Before attempting to remove or install a hard drive while the appliance is running, see the documentation for the
storage controller card to ensure that the host adapter is configured correctly to support hot swappable hard drive removal and
insertion.
CAUTION:
Do not turn off or reboot your appliance while the hard drive is being formatted. Doing so can cause a hard drive
failure.
NOTE:
Use only hard drives that have been tested and approved for use with the hard drive backplane.
NOTE:
Drive replacements must be initiated in VxRail Manager.
When you format a hard drive, allow enough time for the formatting to be completed. High-capacity hard drives can take several hours to
format.
Removing a 2.5-inch hard drive blank
Prerequisites
CAUTION:
To maintain proper appliance cooling, all empty hard drive slots must have hard drive blanks installed.
1
Follow the safety guidelines listed in the Safety instructions section.
2
If installed, remove the bezel.
Steps
Press the release button and slide the hard drive blank out of the hard drive slot.
64
Installing and removing components
