Figure 62. Installing a DC PSU
1
release latch
2
power supply status indicator
3
PSU
4
power connector
5
PSU handle
Next steps
•
Follow the procedure listed in the After working inside your appliance section.
Battery
The battery is used to power the real-time clock and storing the BIOS settings of the appliance.
Replacing the battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your
appliance.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your appliance section.
3
Remove the cooling shroud.
Steps
1
Locate the battery socket. For more information, see the Jumpers and connectors section.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing or
removing a battery.
2
Place your finger between the securing tabs at the negative side of the battery connector, and lift the battery out of the socket.
108
Installing and removing components