Dell EMC VxRail P470 Owner'S Manual Download Page 140

Page: 140 / 140

Getting help

Topics:

•

Contacting Dell EMC

•

Registering for online support

•

Accessing support resources

Contacting Dell EMC

You can link your Online Support account with

VxRail Manager

and access support resources without having to log in separately.

NOTE:

If you plan to set up EMC Secure Remote Services (ESRS), you have to link your Online Support account to VxRail

Manager under the same ID or it may not work properly.

Registering for online support

You can create an

Online Support

account to access support resources such as:

•

Obtain product license files and software updates.

•

Download Dell EMC VxRail Series product documentation.

•

Download the SolVe Desktop Procedure Generator.

•

Browse the Dell EMC VxRail Series community and support information.

•

Link your support account for access to resources from within

VxRail Manager

To register for online support:

Point your Web browser to emc.com/vxrailsupport or support.emc.com.

Click

Fill in the required information.

Support will send you a confirmation email, typically within 48 hours.

Accessing support resources

You can access support resources for your Dell EMC VxRail™ appliance by one of the following:

•

VxRail Manager Support

•

emc.com/vxrailsupport (or support.emc.com)

•

https://solve.emc.com

NOTE:

Additional Dell EMC VxRail

™

Series information is available through the SolVe desktop tool. SolVe includes step-

by-step procedures for replacing certain hardware components, as well as other tasks.

140

Getting help

Summary of Contents for VxRail P470













































































































































Search results

Summary of Contents for VxRail P470

Reviews:

Related manuals for VxRail P470

Brands by name

Popular brands

Dell EMC VxRail P470, Owner'S Manual

Search results

Summary of Contents for VxRail P470

Reviews:

Related manuals for VxRail P470

Brands by name

Popular brands