Figure 10. Removing and installing the front bezel
1
release latch
2
keylock
3
front bezel
4
locking hook
Installing the front bezel
1
Hook the right end of the bezel onto the chassis.
2
Fit the free end of the bezel onto the system.
3
Secure the bezel with the keylock.
System cover
Opening the system
NOTE:
It is recommended that you always use an antistatic mat and antistatic strap while working on components inside the
system.
1
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2
Rotate the latch release lock counter clockwise to the unlocked position.
3
Lift the latch on top of the system and slide the cover back.
4
Grasp the cover on both sides and carefully lift the cover away from the system.
Installing and removing system components
35
