manualshive.com logo in svg

Dell EMC H740P, User Manual

Share
Download
Dell EMC H740P User Manual Download Page 4

Battery Transparent Learn Cycle..............................................................................................................................28

4 Deploying the PERC card............................................................................................................................ 29

Removing the PERC H740P adapter............................................................................................................................ 29
Installing the PERC H740P adapter...............................................................................................................................30
Removing the PERC H740P mini monolithic.................................................................................................................31
Installing the PERC H740P mini monolithic.................................................................................................................. 32
Removing the PERC H745P MX adapter card............................................................................................................ 33
Installing the PERC H745P MX adapter card...............................................................................................................34
Removing the PERC H840 card.................................................................................................................................... 35
Installing the PERC H840 card.......................................................................................................................................36
Part replacement of a PERC card in eHBA mode........................................................................................................36

5 Driver installation......................................................................................................................................... 37

Creating the device driver media................................................................................................................................... 37

Downloading drivers from the Dell support website.............................................................................................. 37
Downloading drivers from the Dell systems service and diagnostic tools media ..............................................38

Windows driver installation............................................................................................................................................. 38
Installing the driver during a Windows Server 2012 R2 and newer installation........................................................38
Installing the driver after Windows Server 2012 R2 and newer installation ............................................................ 38
Updating PERC 10 driver for existing Windows Server 2012 R2 and newer............................................................39
Linux driver installation.................................................................................................................................................... 39

Installing or updating the RPM driver package with KMOD support..................................................................40
Installing or updating the RPM driver package with KMP support..................................................................... 40
Loading the driver during operating system installation........................................................................................40

6 Firmware......................................................................................................................................................42

Installing the firmware using DUP..................................................................................................................................42

7 HII configuration utility.................................................................................................................................43

Entering the HII configuration utility.............................................................................................................................. 43
Exiting the HII configuration utility.................................................................................................................................43
Navigating to Dell PERC 10 configuration utility.......................................................................................................... 43
HII Configuration utility Dashboard View options.........................................................................................................44
Configuration management............................................................................................................................................ 45

Auto Configure RAID 0..............................................................................................................................................45
Creating virtual disks................................................................................................................................................. 45
Configuring virtual disk parameters......................................................................................................................... 45
Creating profile based virtual disk............................................................................................................................46
Viewing Disk Group Properties.................................................................................................................................47
Deleting Configurations............................................................................................................................................. 47

Controller management...................................................................................................................................................47

Clearing controller events......................................................................................................................................... 47
Saving controller events............................................................................................................................................48
Saving debug log........................................................................................................................................................48
Managing link speed.................................................................................................................................................. 48

4

Contents

Summary of Contents for H740P















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands