Dell EMC H740P, User Manual

Page: 48 / 78

Saving controller events
1 Enter the Dell PERC 10 Configuration Utility . See Navigating to Dell PERC 10 configuration utility .
2 Click Main Menu
>
Controller Management
>
Advanced Controller Management .
3 Click Save Controller Events .
A screen is displayed indicating that the operation is completed successfully.
4 Click Ok .
Saving debug log
1 Enter the Dell PERC 10 Configuration Utility . See Navigating to Dell PERC 10 configuration utility .
2 Click Main Menu > Controller Management > Advanced Controller Management .
3 Click Save Debug Log .
A screen is displayed indicating that the operation is completed successfully.
4 Click Ok .
Managing link speed
1 Enter the Dell PERC 10 Configuration Utility . See Navigating to Dell PERC 10 configuration utility .
2 Click Main Menu > Controller Management > Advanced Controller Management .
3 Click Manage Link Speed .
You can view/change the physical disk settings for the controller, if required. The possible options are:
•
Auto
• 3 Gbps
• 6 Gbps
• 12 Gbps
4 Click Ok to save the changes.
NOTE: To reflect the changes, perform an AC power cycle that is disconnecting and reconnecting the power
source.
Restoring factory default settings
1 Enter the Dell PERC 10 Configuration Utility . See Navigating to Dell PERC 10 configuration utility .
2 Click Main Menu > Set Factory Defaults .
A screen is displayed asking you to confirm the operation.
3 Select Confirm and click Yes to continue.
48 HII configuration utility