manualshive.com logo in svg

Dell EMC H740P, User Manual

Share
Download
Dell EMC H740P User Manual Download Page 52

The boot mode operation is completed successfully.

Aborting the consistency check

1 

Enter the 

Dell PERC 10 Configuration Utility

. See 

Navigating to Dell PERC 10 configuration utility

.

2 

Click 

Main Menu

 > 

Controller Management

 > 

Advanced Controller Properties

.

3 

In the 

Controller Properties

 section, set the 

Abort Consistency Check on Error

 option to 

Enabled

.

4 

Click 

Apply Changes

.

The option to abort the consistency check operation on a redundant virtual disk is enabled if there is any inconsistency found in the 
data.

Enabling boot support

1 

Enter the 

Dell PERC 10 Configuration Utility

. See 

Navigating to Dell PERC 10 configuration utility

.

2 

Click 

Main Menu

 > 

Controller Management

.

3 

From the 

Select Boot Device

 drop-down box, select the primary bootable device.

NOTE: 

Select Boot Device is only applicable in legacy BIOS mode.

NOTE: 

4K boot support is only available in UEFI mode and managed by the boot loader.

NOTE: 

In Select Boot Device, you will not be able to view 4K devices. To view all the virtual disks created, navigate to the 

Virtual Disk Management screen in HII. For more information, see 

Virtual disk management

.

NOTE: 

If no boot device is selected, the first virtual disk will be set as the boot device on the next reboot. A Non-RAID disk 

will not be auto-selected as the boot device.

4 

Click 

Apply Changes

.

Boot support is enabled for the selected controller.

Virtual disk management

Virtual disk numbering

Virtual disks are numbered in ascending order beginning with zero in RAID mode, whereas in eHBA mode they are numbered in descending 
order beginning with 239.

Viewing virtual disk properties

1 

Enter the 

Dell PERC 10 Configuration Utility

. See 

Navigating to Dell PERC 10 configuration utility

.

2 

Click 

Main Menu

 > 

Virtual Disk Management

.

All the virtual disks associated with the RAID controller are displayed.

3 

To view the properties, click on the virtual disk. You can view the following properties of the Virtual disk:

Option

Description

Operation

List of operations you can perform on the selected virtual disk. The options are:
•

Blink

•

Unblink

•

Delete Virtual Disk

•

Reconfigure Virtual Disks

52

HII configuration utility

Summary of Contents for H740P















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands