manualshive.com logo in svg

Dell EMC H740P, User Manual

Share
Download
Dell EMC H740P User Manual Download Page 74

Drive status indicator pattern

Condition

Flashes amber four times per second

Drive failed.

Flashes green slowly

Drive rebuilding.

Steady green

Drive online.

Flashes green for three seconds, amber for three seconds, and 
then turns off after six seconds

Rebuild stopped.

HII error messages

Unhealthy Status of the Drivers

Error:

One or more boot driver(s) have reported issues. Check the Driver Health Menu 
in Boot Manager for details.

Probable Cause:

This message might indicate that the cables are not connected, the disks might be missing, or the UEFI driver 
might require configuration changes.

Corrective Action:

1

Check if the cables are connected properly, or replace missing hard drives, if any and then restart the system.

2

Press any key to load the driver health manager to display the configurations. The Driver Health Manager 
displays the driver(s), which requires configuration.

3

Alternately, if the UEFI driver requires configuration, press any key to load the Configuration Utility.

74

Troubleshooting

Summary of Contents for H740P















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands