manualshive.com logo in svg

Dell EMC H740P, User Manual

Share
Download
Dell EMC H740P User Manual Download Page 15

Table 2. PERC cards with eHBA mode enabled

Feature

eHBA mode (H740P and H745P MX only)

RAID levels

0, 1, and 10

Host I/O command queue depth

5120 (H740P)

Maximum supported PDs

Max (240)

4KB drives

Yes

Write Back caching

Yes (VDs only)

SED support

Yes, local key management

Battery maintenance

Yes

Patrol Read

Yes (VDs only)

Controller and battery Diagnostics

Yes

Non-RAID disks

A Non-RAID disk is a single disk to the host, and not a RAID volume. The only supported cache policy for Non-RAID disks is write-through.

Auto Configure RAID 0

Auto Configure RAID 0 feature creates a single drive RAID 0 on each physical disk that is in the ready state. For more information, see 

Auto 

Configure RAID 0

.

PERC H745P MX enclosure support

The H745P MX is a RAID controller for the PowerEdge MX740c and MX840c compute sleds. It is used as an interface in a multipath 
topology with the MX5016s storage sled for the MX7000 modular system. The following illustration describes the multipath topology for 
the MX7000 modular system:

Features

15

Summary of Contents for H740P















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands