Dell EMC H740P User Manual Download Page 37

Page: 37 / 78

Driver installation

The Dell PowerEdge RAID Controller (PERC) 10 series of cards require software drivers to operate with the supported operating systems.

This chapter contains the procedures for installing the drivers for the PERC 10 cards.

NOTE:

The driver for PERC 10 for VMware ESXi is packaged within the VMware ESXi ISO image downloaded from Dell. For

more information, see the VMware documentation at Dell.com/virtualizationsolutions. It is not recommended to have drivers
from controllers prior to PERC 10 on the same system.

The two methods for installing a driver discussed in this chapter are:

•

Installing a driver during operating system installation:

Use this method if you are performing a new installation of the operating

system and want to include the drivers.

•

Updating existing drivers:

Use this method if the operating system and the PERC 10 family of controllers are already installed and you

want to update to the latest drivers.

Topics:

•

Creating the device driver media

•

Windows driver installation

•

Installing the driver during a Windows Server 2012 R2 and newer installation

•

Installing the driver after Windows Server 2012 R2 and newer installation

•

Updating PERC 10 driver for existing Windows Server 2012 R2 and newer

•

Linux driver installation

Creating the device driver media

Use one of the following two methods to create the device driver media:

•

Downloading Drivers From The Dell Support Website

•

Downloading Drivers From The Dell Systems Service And Diagnostic Tools Media

Downloading drivers from the Dell support website

To download drivers from the Dell Support website:

Go to

Dell.com/support

Enter the service tag of your system in the

Choose by Service Tag to get started

field or select

Choose from a list of all Dell

products

Select the

System Type

Operating System

, and

Summary of Contents for H740P















































































Search results

Summary of Contents for H740P

Reviews:

Brands by name

Popular brands

Dell EMC H740P, User Manual

Search results

Summary of Contents for H740P

Reviews:

Brands by name

Popular brands