manualshive.com logo in svg

Dell EMC H740P, User Manual

Share
Download
Dell EMC H740P User Manual Download Page 38

Downloading drivers from the Dell systems service and 
diagnostic tools media 

To download drivers from the 

Dell Systems Service and Diagnostic Tools

 media:

1 

Insert the 

Dell Systems Service and Diagnostics Tools

 media in your system.

The 

Welcome to Dell Service and Diagnostic Utilities

 screen is displayed.

2 

Select your system model and operating system.

3 

Click 

Continue

.

4 

From the list of drivers displayed, select the driver you require.

5 

Select the self-extracting zip file and click

 Run

.

6 

Copy the driver to a CD, DVD, or USB drive.

7 

Repeat this procedure for all the drivers you require.

Windows driver installation

Before you install the Windows driver for PERC 10, you must first create a device driver media.

•

Read the Microsoft 

Getting Started

 document that shipped with your operating system.

•

Ensure that your system has the latest BIOS, firmware, and driver updates. If required, download the latest BIOS, firmware, and driver 

updates from 

Dell.com/support

.

•

Create a device driver media using one of the methods listed below:
– USB drive

– CD

– DVD

Installing the driver during a Windows Server 2012 R2 

and newer installation

To install the driver:

1 

Boot the system using the Windows Server 2012 R2, or newer media.

2 

Follow the on-screen instructions until you reach 

Where do you want to install Windows Server 2012 R2 or newer

 window and then 

select 

Load driver

.

3 

The system prompts you to insert the media. Insert the installation media and browse to the appropriate location.

4 

Select a PERC 10 series card from the list.

5 

Click 

Next

 and continue installation.

Installing the driver after Windows Server 2012 R2 

and newer installation 

Perform the following steps to configure the driver for the RAID controller on a system that already has Windows installed:

1 

Turn off the system.

2 

Install the new RAID controller in the system.
For detailed instructions on installing the RAID controller in the system, see 

Deploying the PERC card

.

3 

Turn on the system.

38

Driver installation

Summary of Contents for H740P















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands