Figure 76. Installing expansion card into butterfly riser
Next steps
1
If applicable, connect the cables to the expansion card.
2
If applicable,
.
3
Follow the procedure listed in
After working inside your system
.
4
Install any device drivers required for the card as described in the documentation for the card.
Removing expansion card from the system board
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Disconnect any cables connected to the expansion card.
Steps
1
Pull and lift up the expansion card retention latch lock to open.
2
Hold the expansion card by the edge and pull the card to disconnect from the system board connector.
Installing and removing system components
123
