![background image](http://html1.mh-extra.com/html/dell-emc/e46s001/e46s001_installation-and-service-manual_2468272136.webp)
Figure 91. Removing the optional IDSDM/vFlash card
NOTE:
There are two dip switches on the IDSDM/vFlash card for write-protection.
Next step
Installing optional IDSDM or vFlash card
Installing optional IDSDM or vFlash card
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
section.
2
Align the IDSDM/vFlash card with the connector on the system board.
3
Push the IDSDM/vFlash card until it is firmly seated on the system board.
136
Installing and removing system components