![background image](http://html1.mh-extra.com/html/dell-emc/e46s001/e46s001_installation-and-service-manual_2468272173.webp)
Figure 127. Installing system board
Next steps
1
Replace the following:
a
Upgrading the Trusted Platform Module
b
Installing PERC card into the internal PERC riser
c
Optional internal USB memory key
)
d
USB 3.0 module (if applicable)
e
f
All expansion cards and risers
g
Processors and heat sink modules
h
Processors blanks (if applicable)
i
Memory modules and memory module blanks
j
k
l
Drive cage (rear) (if applicable)
2
Reconnect all cables to the system board.
NOTE:
Ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing
bracket.
3
Follow the procedure listed in
After working inside your system
.
4
Ensure that you:
a
Use the Easy Restore feature to restore the Service Tag. For more information, see the
Restoring the service tag using Easy
section.
b
If the Service Tag is not backed up in the backup flash device, enter the Service Tag manually. For more information, see the
Manually update the Service Tag
section.
Installing and removing system components
173