4.24 Flip flops
Description
Notes
Flip flop output [1-16]
The event is active when the flip flop is set or toggled.
4.25 Power limit outputs
These events are only available in genset controllers.
Description
Notes
Power Limit Output [1-4]
Indicates which Power Limit Output is active.
4.26 Easy connect
These events are only available in genset controllers.
Description
Notes
Plant active
The event is active when the controller is in a power management system.
Stand-alone
The event is active when the controller is not in a power management system.
4.27 Grid support
These events are only available in genset controllers.
Description
Notes
Power Ramp [1-4] active
The actual power ramp [1-4] is active.
Default Var Reg variant active
Default Var Regulation variant is active.
Var Reg variant [A-D] active
The actual Var Regulation variant [A-D] is active.
Q(u) variant A ext. control set to OFF Q(u) variant A external control set to OFF is active.
Q(u) variant A ext. control set to
MODBUS
Q(u) variant A external control set to MODBUS is active.
Q(u) variant A ext. control set to
ANALOGUE
Q(u) variant A external control set to ANALOGUE is active.
Q(u) variant C ext. control set to OFF Q(u) variant C external control set to OFF is active.
Q(u) variant C ext. control set to
MODBUS
Q(u) variant C external control set to MODBUS is active.
Q(u) variant C ext. control set to
ANALOGUE
Q(u) variant C external control set to ANALOGUE is active.
Application note 4189341276B EN
Page 32 of 50
