3.2.5
Output settings
The output defines the reaction from the system, when the function is activated. A delay
time can be set for a function (no delay, if set to 0 s).
The groups in the
Output
window depend on the controller type and its options. Each
group contains a number of outputs. See the
List of outputs
chapter for details.
NOTE
If a relay output is chosen, this relay must be configured as a limit relay
output in
I/O setup
or in the parameter list.
3.3
Definitions
TRUE state
A TRUE state of an input/event will be detected, if the condition defined in the input event is met. For example:
•
Digital input is TRUE when activated (12/24V DC applied).
•
Alarm condition is TRUE when the alarm is present.
•
Mode condition is TRUE when the mode is selected.
FALSE state
A FALSE state of an input event will be detected, if the condition defined in the input event is
not
met. For example:
•
Digital input is FALSE when deactivated (12/24V DC not applied).
•
Alarm condition is FALSE when the alarm is not present.
•
Mode condition is FALSE when the mode is not selected.
3.4
Examples
By using the events, rules can be made for the use of the M-Logic.
3.4.1
Virtual events
Virtual events are used to expand the number of events in a logic sequence. For example, the output of Logic 1 can be used to
continue the sequence in Logic 2.
Application note 4189341276B EN
Page 11 of 50
