4, rue de Jarente - F 75004 Paris
Tel: +33 (0)1 71 18 18 60
Fax : +33 (0)9 70 80 10 00
S A S a u c a p i t a l d e 1 0 5 0 0 0
€
R C S P a r i s B 4 0 2 2 1 1 0 1 5
T V A : F R 0 5 4 0 2 2 1 1 0 1 5
18/29
2. Arm installation
Slide the insulator onto the arm cable. Connect the cable from the operating light to the cable coming from the arm.
Slide the insulator over the connectors and secure it with cable ties.
Mount the operating light to the light arm by pushing it into position.
3. Attaching the light head to the light arm
Assemble the light head to the arm following instructions given at §: II- 4. p.14
4. Connection of the power supply cables
Route the power cable out from inside the cuspidor.
If needed, connect the power extension cable to the power cable.
Connect the power extension cable to the power supply and isolate the connectors (double isolation)
Power supply double isolation double isolation to operating light
Power supply delivered with the operating light.
NOTE: Do not use any other power supply type with the operating light.
Connect the power supply to the mains outlet.
