4, rue de Jarente - F 75004 Paris
Tel: +33 (0)1 71 18 18 60
Fax : +33 (0)9 70 80 10 00
S A S a u c a p i t a l d e 1 0 5 0 0 0
€
R C S P a r i s B 4 0 2 2 1 1 0 1 5
T V A : F R 0 5 4 0 2 2 1 1 0 1 5
20/29
NOTE :
The light connections must be hard wired to the mains (not plug connected).
The wall adapter plate must be positioned so that the mains cable can be lead out (12cm) from the opening of
the adapter plate.
1. Installation of the wall adapter plate
Use the wall adapter plate as a template and mark the position of the four attachment screw holes.
- If the wall is made of concrete or brick, use the M8x30 DIN 912 screws and the expansion anchors.
Drill 4 Ø 10mm (0.4in.) and 32 to 35mm (1.25in.) depth holes, and place the expansion anchors into them.
Screw the plate to the wall.
- If the wall is made of wood or plaster, use the M8x50 DIN 571 lag screws.
Do not use the expansion anchors with wooden and plaster wall.
Drill 4 Ø 5mm, 25 to 30 mm in depth holes for the attachment screws.
Screw the plate to the wall.
Attach the connection box to the adapter plate with 2 plastic screws and nuts.
Trous de
fixation
Schéma platine
murale
Openings for
fastening
screws
Wall plate
