5
1.
GENERAL INFORMATION.
The operating manual is an integral and essential part of the product
and must be forwarded to the user also in case when the property is
transmitted. Users should carefully read the manual and save it for the
future because all remarks included there are important guidelines
concerning safety during installation, usage and maintenance.
Installation of the boiler must be carried out in accordance with the
mandatory standards in the country of destination, according to
guidelines of the manufacturer and by qualified personnel. Improper
installation of the device can be a reason for personal injuries and
damage to property for which the manufacturer is not liable.
A heating boiler can be used only for the purpose it was explicitly
intended. Any other use should be treated as inappropriate and in
consequence as dangerous.
In case of error during installation, usage or maintenance works
caused by non-observance of the legislation, regulations in force or
instructions contained in this manual (or others, delivered by the
manufacturer) the manufacturer rejects any contractual or non-
contractual liability for resulting damages and the warranty for the device
becomes void.
Choice of heating units for heating of multi-building facilities is made
on the basis of building heat balance, putting special attention to losses
resulting from heat transfer to the facilities.
Technical data allowing approximate selection of the boiler are
presented in table no. 4. Boiler power should be chosen with a 10%
margin with respect to actual requirements resulting from the building
heat balance.
All the most important information included in the operating manual is
distinguished by marks pointing out the
user’s attention to hazards
that
can be present during the operation of the boiler. The symbols used in
the text are explained below:
Information, warning and prohibiting pictographs indicating
types of hazards are located also on the boiler.
Read the Operating
Manual
prior
to
starting the device.
Note!
Hot surface! Burn
risk!
Never stand in front
of the boiler door
while opening it.
Burn risk!
Danger!
Electric shock danger!
Note!
Possible threat to equipment and natural environment!
Hint!
Useful information and hints.
Danger! Burn risk!
Danger!
Direct threat to life and health!
NOTE!!!
Please be informed that any modifications carried out
to adapt the boiler to any functions unforeseen by the
Manufacturer, including combustion processes outside the
automatic furnace and use of the other fuels than indicated
by the Manufacturer in this Operating Manual is strictly
forbidden will void the warranty for the equipment.
Use only and exclusively fuels recommended by the
Manufacturer in the boiler Operating Manual and the
Certificates. Use of the other fuels, than these indicated by
the Manufacturer, will void the warranty.
NOTE!!!
Modern boilers of 5
th
class and ECODESIGN
distinguish with the low temperature of flue gas.
Their operation with maintaining temperature of return
water from the system below 55ºC leads to accelerated
corrosion of the heat exchanger.
It is necessary to use the solutions ensuring temperature of
return water at a minimum level of 55 ºC. This is a condition to
secure the warranty claims for tightness of heat exchanger
