4L7: Fuel Transfer System
Fuel Transfer
To transfer fuel from one tank to another
(very rarely required), set the valves as shown in
the table on the preceding page, then turn the
pump on (the breaker must be on in the DC power
panel). You should watch the progress of the
transfer carefully and shut the pump off when the
transfer is complete without overfilling the target
tank.
Be careful to be sure you
don’t overfill a tank and
cause fuel to be dumped out
the tank vent!
4L8: Fuel Measurement
There are sight gauges on each tank.
The fuel transfer pump is just aft of the fuel manifold to port in the
Engine Room. Arrow points to off-on switch.
Section 4L: Fuel System 4.36
