8
PosiTector
PosiTector
RTR-H
RTR-H
Probe
Probe
The PosiTector
RTR-H
probe measures burnished
Testex Press-O-Film replica tape to produce peak-to-valley
surface profile height measurements.
More probe information is available at
www.defelsko.com/rtr
Power-up / Power-down
The PosiTector
SmartLink
powers-up when the LED button is pressed.
To preserve battery life, the PosiTector
SmartLink
powers-down after
5 minutes of no activity. Alternatively, press and hold the LED button
until it turns red and shuts off (approximately 5 seconds).
All probe settings and calibration adjustments are retained, stored
measurement data is retained within the smart device.
Tri-Color LED Button
The LED visually provides connection and measurement status.
LED Color Status:
Blue Blink
= Not Connected to PosiTector App
Blue Solid
= Connected to PosiTector App
Green Blink
= Successful Reading
Factory Calibration
Every PosiTector
RTR
probe is factory calibrated and includes a
Certificate of Calibration. This factory calibration information is
permanently stored within the probe and cannot be overwritten by the
user. The icon indicates factory zero. For best accuracy, it is
recommended that a
Zero Cal Adjustment
be performed.
