7
Connect a Probe
To connect a probe, slide the plastic probe connector in the direction
of the arrow (shown above) until it locks in place. Reverse for
detaching the probe.
The PosiTector App features probe hot-swap. During the
measurement process, probes can be interchanged without the need
to go back to the
Search
screen. Simply swap probes (PosiTector
SmartLink
will power-down) and then power-up the PosiTector
SmartLink
. The PosiTector App will automatically recognize the probe
and be ready to measure.
NOTE:
When powered-up, the PosiTector
SmartLink
automatically determines
what type of probe is attached and does a self-check. The probe type,
model and serial number are displayed when found within the app's
Search
screen.
