12
The probe contains two measuring surfaces (anvils) that can
become contaminated with dust particles and residual tape
adhesive. It is therefore recommended to clean the probe regularly
with the included cleaning card. Cleaning is essential prior to
performing a probe zero (pg. 15) or a verification of accuracy
(pg. 13). It is best performed when the Gage is powered down.
With the Gage powered-down, swipe the card through the opening
a few times while firmly pressing both probe buttons.
The cleaning card can also be used to clean the surfaces of analog
spring micrometers. Replacement cards are available from your
dealer.
Cleaning the probe opening (anvils)
Before Cleaning
After Cleaning
Cleaning the anvils is especially important when using the
PosiTector
RTR-P
to measure peak density (P
d
) and generate
surface images.
NOTE:
Example of a 2D surface image taken with a
PosiTector
RTR-P
Advanced before and after cleaning the anvils with the cleaning
card.
