4
Additional PosiTector Probes:
The
PosiTector
body accepts a wide variety of probe types
including magnetic, eddy current and ultrasonic coating thickness,
surface profile, Shore hardness durometer, salt contamination and
ultrasonic wall thickness probes. See
www.defelsko.com/probes
Probes
Probes
When powered-up, the
PosiTector
automatically
determines which probe is attached and does a
self-check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a new probe.
It is not necessary to power-down the gage when
interchanging probes.
NOTE:
Probe Connector
Button Operated
Spring Micrometer
applies constant
anvil pressure
Measurement
Opening (Anvils)
Camera
PosiTector
RTR probe
(RTR-P only)
(RTR-P shown)
PosiTector bodies accept all PosiTector DPM, 6000, 200, SPG,
RTR, SST, SHD and UTG probes
