manualshive.com logo in svg

Dedicated Micros SD Advanced, Installation And Operation Manual

Share
Download
Dedicated Micros SD Advanced Installation And Operation Manual Download Page 52

Dedicated Micros ©2009

SD Adv

anc

ed

IP Camera

This menu allows the configuration of connected IP Cameras (cameras connected directly to a 

network broadcasting a digital video stream from an IP address). It can also connect to other NetVu 

Connected DVRs and treat one of the network feeds from that DVR as a digital video stream.

Title 

Displays 

the camera title.

Mode 

Select the type of IP camera i.e. if the stream is originating 

from a NetVu Connected server select ‘NetVu Server’. If from 

a NetVu camera such as a Dedicated Micros CamVu 2000, 

select ‘NetVu Camera’.

URL 

Edit the URL address of the IP camera source.

Port 

If required edit the port input data. This will default to 80 (HTTP).

Chan 

If required edit the channel input data.

FPS 

Edit the FPS (Frames per Second) recording settings.

Summary of Contents for SD Advanced













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands