manualshive.com logo in svg

Dedicated Micros SD Advanced, Installation And Operation Manual

Share
Download
Dedicated Micros SD Advanced Installation And Operation Manual Download Page 22

Dedicated Micros ©2009

SD Adv

anc

ed

Main Menu

When first accessing the unit, the main menu will be displayed. This menu allows access to the 

Configuration menus, the Viewer menus and also several Download options. 

Note: 

The Download options will only be available if viewing remotely via an IP connection.

Select the Configuration menu tab to access the unit’s Configuration menus. Refer to ‘Navigating the 

Configuration Menus’ for further guidance.
Select the Viewer menu tab to access the unit’s Viewer function. Refer to ‘Unit Operation’ for 

information on the numerous Viewer features.
Select the Download menu tab to access the various Download sub-options. Select from:

•  Product Manual 

Select to open an electronic version of the   

 

 

 

 

Installation & Operation Guide.

•  ObserVer Manual 

Select to open an electronic version of the NetVu ObserVer  

 

 

 

User Guide. NetVu ObserVer is a free video management  

 

 

 

software package from Dedicated Micros that allows users to  

 

 

 

seamlessly view distributed images from any  

 

 

 

 

‘NetVu Connected’ product.

•  NetVu ObserVer  

Select to download the NetVu ObserVer video

 

  

 

 

management software.

•  Java (JRE) 

 

Select to download the Java (JRE) software (from the unit).  

 

 

 

This software is required to successfully view Configuration  

 

 

 

and Viewer menus remotely.

IMPORTANT: 

By default, no Usernames and Passwords are required to access any of the  

 

 

various menus. Usernames and Passwords can however be added to regulate  

 

 

access to the Configuration and Viewer menus. Refer to the ‘Console Settings-> 

 

 

User Accounts’ menu for information on establishing Usernames and Passwords.

Summary of Contents for SD Advanced













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands