manualshive.com logo in svg

Dedicated Micros SD Advanced, Installation And Operation Manual

Share
Download
Dedicated Micros SD Advanced Installation And Operation Manual Download Page 125

Dedicated Micros ©2009

1

SD Adv

anc

ed

Help Videos

The Help Videos offer step by step guidance on performing some of the most common tasks 

required of the unit. Access the Video Help menu by selecting the Help (yellow) option on the View 

Menu. The Help videos are divided into six categories; each category containing  

relevant videos. To play a video, first click directly on one of the six categories. If viewing remotely, 

use the Directional buttons and the OK button. A connected USB mouse can also be used. When a 

category is chosen, all associated videos will be listed. Select a video to play.

Note:  

A speaker must be connected to the Audio OUT connection to hear the associated  

audio commentary.

Purple 

Back 

Return to the ‘View Menu’ page.

Summary of Contents for SD Advanced













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands