manualshive.com logo in svg

Dedicated Micros SD Advanced, Installation And Operation Manual

Share
Download
Dedicated Micros SD Advanced Installation And Operation Manual Download Page 135

Dedicated Micros ©2009

1

SD Adv

anc

ed

Appendix E

Unit Specification

LANGUAGES 

Currently: English, French, Italian, German, Spanish, Russian, Czech, Danish, Finnish, Norwegian, Swedish & Dutch. 

CAMERAS

8, 12 and 16 camera inputs available. Auto detection on power up.  Looping BNC connectors are provided for each 

camera input on all input variants.
Option to view Live or Replay all or selected cameras without affecting recording.

MONITOR VIEWING

Main monitor:

Full screen, picture in picture, quad viewing and multiscreen.
Mon A: Composite video BNC connector and S-Video.
VGA Monitor Output

Spot monitor:

Full screen, sequence.
Mon B: Composite video BNC connector.

ACTIVITY DETECTION

Each activity detection will switch the selected camera from normal record profile to alarm record profile. This feature 

can also; log the event, activate a relay, trigger a sounder, switch camera or link to an alarm.
Individual configurable alarm responses include; move camera to preset, activate a relay, remote alarm reporting, email 

on alarm, log event, switch camera, activate sounder.

ALARMS & RELAYS

20 normally open/closed tamper proof alarm inputs via back panel.
Keyswitch input to select set/unset.
4 relay outputs.

AUDIO

The user has the option to record and play back audio through the unit. Recorded with images, audio can be played 

back directly from the unit via powered external speakers.
Audio output for on site PA/Challenge.

Connections:

Line in: 1V pk-pk, RCA phono socket.
Line out: 1V pk-pk, RCA phono socket.

SEARCH AND PLAYBACK

•   Frame advance/rewind, fast picture search and pause keys.
•   Event list, including event list filter with unique quadrant preview facility.
•   Video Timeline.
•   Playback in quad, multiscreen, picture in picture and full screen.

Multi

Mode

 RECORDING

Multi

Mode

 recording gives you the ability to set different record rates, resolutions and compression algorithms    

(MPEG-4/JPEG) across scheduled, normal and alarm modes dynamically on individual cameras.  

RECORDING FROM

Playback and record to hard disk simultaneously.
Alarmed or manually selected images can be protected from being overwritten.
Timed expiry option allows images to be held for a selected number of days. 

Summary of Contents for SD Advanced













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands