manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 57 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 57

Dedicated Micros ©2010

57

DV

-IP DEC

ODER

Remote Control

The IR Remote Control offers all the control functionality required to navigate the menus.

Note: 

To use the IR Remote Control, the Remote IR Extender must be connected to the IR socket 

on the unit.  

Not all buttons on the IR Remote Control are relevant for the DV-IP Decoder. 

Key 

Button

     

 

 

 

    

Switches the Remote Control to ‘TV’  

mode and sends codes understood by  

common TV sets.

 

Switches the Remote Control to ‘DVR’  

mode. Note the DVR mode is the    

default mode of operation. 

 
 

Toggle

 

the speed of PTZ camera  

 

movement (two speeds available).

 

Use the Zoom button to zoom in/out 

with a selected camera. Also used 

to zoom (x2) into Live or Playback 

images.

 

 

This button will change the Zoom 

Keys operation to focus or iris 

functions (when available).

 

Use this button to cycle through  

 

available cameras. 

 

This button should be pressed 

(followed by a numeric entry) to 

carry out auxiliary actions on a PTZ 

camera.

 

Press the Menu button to enter the    

Configuration menus.

 

Press the Exit button to exit the  

 

Configuration menus.

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments