manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 4 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 4

Dedicated Micros ©2010

4

DV

-IP DEC

ODER

Features

The DV-IP Decoder from Dedicated Micros is equipped with an array of valuable features designed 

to enhance the operator experience. 

•  Display JPEG or MPEG4 video streams on a CCTV Video Wall from any  

connected device

•  High definition and composite monitor outputs to allow scalable video wall solutions
•  Includes Enhanced User Interface and control functionality
•  Pick-a-Point and Pick-a-Point Icon Video Management System integration
•  Gigabit Ethernet and Ethernet network connections 
•  Incorporated display of analogue, IP and megapixel cameras
•  NetVu Connected for seamless interoperability with other NetVu Connected devices
•  Embedded Operating System
•  BS8418 compliant

The DV-IP Decoder has NetVu Connected technology built-in to ensure maximum compatibility 

with future developments in networked security. NetVu Connected technology enables the DV-IP 

Decoder to fully interact with other NetVu Connected compatible products from Dedicated Micros 

including the Pick-a-Point Icon  and NetVu ObserVer. Providing interoperability between the 

worlds leading security companies, NetVu Connected uses industry standard networking protocols 

supported by a wide range of third party integration products and SDKs to ensure future on-going 

compatibility.

Design of the manual

For ease of use, this manual has two parts:

1. Installation 

Shows details of how to install the unit and connect external devices.

2. Configuration 

Shows details of the unit’s menus. 

 

The order and layout of these pages has been designed to help the setup process. It is 

recommended that the menus are edited in sequential order to enable accurate, easy and efficient 

setup.

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments