manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 26 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 26

Dedicated Micros ©2010

26

DV

-IP DEC

ODER

Serial Ports 

This menu allows configuration of the unit’s Serial ports. Refer to ‘Installing the Unit’ for  

installation information. 

Serial Port 

There are four serial ports available.

Port Config 

The serial ports can be configured to specific uses.  

 

Select from: 

 

 

 

None 

Switches port off

 

 

 

Debug 

Sets port for serial communications

 

 

 

PPP 

Sets port for Point to Point Protocol 

 

 

 

Telem 

Sets port for Telemetry purposes

 

 

 

Comm 

Sets port for Comms purposes 

Interface Type 

Choose the type of serial interface being used. Select from 

RS232, RS485 or RS422.

Baud/Parity/Data/Stop/Flow Control  These options allow the Serial port communication settings to 

be configured.

Note:  

When a telemetry protocol is selected, these settings will default to pre-determined values 

and should not normally be altered. 

Protocol 

This is a drop down list of serial telemetry protocols supported by 

the unit.

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments