manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 54 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 54

Dedicated Micros ©2010

54

DV

-IP DEC

ODER

Firewall

This menu allows the user to block access to the unit via specific network port(s).

Enable Ping Response 

Enabling this option will allow an external client to receive a 

response when attempting to ‘ping’ the unit. Disabling this option 

will make the unit less visible on the network.

Table Entry 

Up to 32 Configuration settings may be entered.

Open TCP ports  

This option can identify which system TCP ports are available. If a 

host tries to communicate with the unit using a TCP

 

port that is not within the ‘open’ range (even with a valid IP 

address), access will not be granted to the unit. The enabled ports 

can be a range or single port address, if a single port is needed 

then enter the same port number in the to and from section.

Open UDP ports  

This option can identify which system UDP ports are available. If 

a host tries to communicate with the unit using a UDP port that is 

not within the ‘open’ range (even with a valid IP address), access 

will not be granted to the unit. The enabled ports can be a range 

or single port address, if a single port is needed then enter the 

same port number in the to and from section. 

Event Search

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments