manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 42 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 42

Dedicated Micros ©2010

42

DV

-IP DEC

ODER

Network

This menu allows additional network settings to be configured if required. If utilising the 1Gb network 

connection, enter address details via Network Settings->Gb Network.

Server Name 

This field can be edited to allocate a name to the unit. This would 

be used if accessing the unit via a Domain Name Server (DNS). 

IP Address 

This is the IP address allocated to the unit.

Sub Net 

This is the subnet of the network were the unit is located. 

Gateway 

This is the IP address of the default gateway (router).

Primary DNS 

This is the primary DNS server IP address for applications utilising 

domain names.

Max Transmission Rate 

Shows the maximum transmission speed for the network type.

Tx Image Buffers 

This is used in order to improve the picture delivery over Ethernet 

when using a slow connection i.e. 256Kbps. A buffer setting of 1,2 

or 3 is available.

Ethernet MTU 

This is the maximum transmit unit for the Ethernet packet. The 

MTU is the largest physical packet size measured in bytes that the 

network can transmit. By default this figure is set to 1500bytes.

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments