Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 50 | Manualshive

Page: 50 / 64

Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 50

Dedicated Micros ©2010

50

DV

-IP DEC

ODER

Web Cam

Any of the video inputs on the unit can be made available for transmission to a webserver via a

designated webcam server. These images can then be incorporated into a web page and accessed

via a standard web browser.

Note:

This menu will only be displayed if ‘Webcam Support’ is selected in the

System Settings->Features menu.

Server URL

This is the IP address, URL or Domain Name of the

WEBCAM Server. Images will be uploaded from the unit to

this server at specified time intervals.

Root Directory

This is the main/root directory on the webcam server where

the image directory will be located.

Image Directory

This directory will be created when the initial image is

uploaded to the webcam server, it is the directory where all

images will be saved on the server.

Image Filename Prefix

This is an identifier for images sent from the unit and will be

stored as a prefix to the file name.

Username

If it is necessary to use an authentication process to access

the webcam server, enter the relevant username here.

Password

If it is necessary to use an authentication process to access

the webcam server, enter the relevant password here.

«
...
48
49
50
51
52
...
»

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments