manualshive.com logo in svg

Dedicated Micros DV-IP Decoder, Installation And Operation Manual, Page: 20 / 64

Share
Download
Dedicated Micros DV-IP Decoder Installation And Operation Manual Download Page 20

Dedicated Micros ©2010

20

DV

-IP DEC

ODER

System

6.13

This menu shows the general information about the unit including the version of software installed, 

the unit’s serial number and the allocated DHCP IP address.  

Product Descriptor 

Details the product model.  

Serial Number 

Identifies the serial number of the specific unit.

PCB Serial Number 

Displays the PCB (Printed Circuit Board) serial number of the unit.

Product Code 

Displays a code identifying the unit’s specification.

System Name 

This field can be edited to allocate a name to the unit. This is 

displayed when the unit is accessed via NetVu ObserVer and is 

sent when transmitting information to a Remote Video Response 

Centres (RVRC).

Video Standard 

Displays the video standard adopted by the unit i.e. PAL, NTSC.

Number of Monitors 

Shows the number of monitors connected to the unit.

MAC Address 

This is the MAC address assigned to the unit.

IP Address 

This is the IP address allocated to the unit.

Sub Net 

This is the subnet of the network where the unit is located. 

Summary of Contents for DV-IP Decoder

































































Reviews:

No comments