Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 80 / 160

80
CamVu 720
E-mail
The unit can automatically transmit an email to an SMTP server under numerous conditions i.e. on
start up, on receipt of an alarm, camera failure etc. This allows the unit to be installed in unmanned
applications where a Remote Video Response Centre (or Manager etc.) would be notified by email if any
of these conditions occur.
Note: This menu will only be displayed if ‘EMail Reporting’ is selected in the
System -> Features -> System menu.
Connection Profile It is possible for the email to be transmitted via the Ethernet network.
This setting presumes that the unit is connected to a LAN or WAN and
allocated a valid IP address.
Mail Server Address This is the IP address or URL of the SMTP Server that the email will
be sent to. The SMTP server will then forward this to the intended
recipient.
Username Enter the login details for the email account used above.
Password Enter the login details for the email account used above.
Recipient Email This is the email address of the intended recipient.
Recipient Display Name This is the addressee name that will be shown in the email name field.
Reply to Email This field must be configured if the recipient is to reply to an email. The
unit does not accept incoming emails therefore ensure this is a valid
email address.
Reply To Display Name This is the ‘reply to’ name that will be shown in the email name field.