Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 131 / 160

131
Installation Guide
Program Page
The Program Menu page allows the PTZ configuration on the currently selected telemetry camera to be
accessed and configured.
Red Dome Select to display the Dome Menu page.
Green Store Use to save the current view as a Preset for this
camera. Press this button then a preset position (using
the numeric keys on the IR Remote Control or optional
Keyboard if viewing via a local monitor).
To re-send the camera to this position, select the
camera, then press Next -> Preset -> (preset number).
Note: When entering a new preset, any previous preset assigned to that number (for the same camera)
will be overwritten.
Yellow Select This option will send the camera to
the stored ‘Preset1’ position.
Blue Set Origin The Origin option allows a base position to be
established for the Oracle dome camera. The camera
will register this position as zero degrees. Any
command that sends the camera to a coordinate will
use this origin as its starting point..
Note: This option is only available for Oracle dome cameras.
Purple Back Return to the ‘PTZ Program Option’ page.