Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 30 / 160

30
CamVu 720
Refresh (Purple) Refreshes the information on the current page.
System Features Video
Detected Video Standard The unit automatically detects the video standard being used i.e. PAL/NTSC.
Analogue Output Resolution Allows selection of the resolution, options are 704 x 576, 704 x 512 and
640 x 512
Deinterlace Filter Select this option to improve display clarity and minimise the comb effect
that may be visible when recording high motion scenes in high resolution.
3D Input Filter Advanced input filtering to the video codec, providing input signal
noise reduction. It’s primary purpose is to reduce noise observed when
viewing standard definition cameras or HD monitors. Options are Off,
Time Domain Filter, Spatial Filter, or Both.
Segment Aspect Ratio This setting control how a 4:3 image is displayed in a multi-screen or
wide screen format on the local viewer. The available display segment
changes depending on the number of multi screen images selected for
display. Stretch forces the image to fill the available display segment.
This may result in some distortion of the display image. Zoom Fit forces
the frame to fill the available segment completely and proportionally.
Consequently some of the image at the top and bottom of the frame
may be cropped. Frame Fit forces the frame to fill the available
segment proportionally, resulting in black bars left and right on some
multi display choices.
Network (Green) Select to open the System->Features->Network page
Video (Yellow) Select to open the System->Features->Video page