Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 49 / 160

49
Installation Guide
Advanced Record
Menu View Switch to the Simple Profile Record menu.
Note: When Advanced Record settings have been changed, it is not possible access the Simple
Record menu until the newly configured Advanced Record settings have been applied. To do this,
open the Record menu and select the ‘Save’ option. It will then be possible to return to the Profile
Record menu and access Simple Record.
Days Recording Displays the record duration possible using the current configuration.
Channel Displays the Camera Name.
Filter by Displays the Recording Settings.
Unset/Set/Override Normal Shows the recording profile used by the camera if no Timed Schedules
are applied and the camera is operating under Normal (non Event)
conditions, refer to ‘Schedule’ for further information .
Unset/Set/Override Event Shows the recording quality that will be used by the camera during
an Alarm or Event. Note that Set and Override schedules will be used
only when Timed Schedules are applied,
refer to ‘Schedule’ for further
information
.
Comp Select image compression format (MPEG, JPEG or H264).
Res Select image resolution format (HD720, XGA,SVGA, VGA, QVGA,
Q2VGA).
rate_kbps If MPEG4 is selected, the figure entered here will be the bit rate
allocated. A higher bit rate will provide better quality. MPEG bit rates
can be entered within the range of 45-2500K bits/second.