Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 150 / 160

150
CamVu 720
NETVU OBSERVER - SEAMLESS VIDEO MANAGEMENT
Dedicated Micros NetVu ObserVer video management software allows seamless viewing and control of live and recorded images from any NetVu
Connected product (IP or analogue) in a single interface. The ability to view multiple sites simultaneously makes management of any security
installation efficient. The inclusion of RVRC (ARC) features such as EDP, event characterisation and report generation make NetVu ObserVer
ideal for remote monitoring of multiple sites. (Supplied with Product, Apple Mac Version Available)
ALARMS & RELAYS
Video Motion Detection (VMD) & Activity Detection, Zoned alarms based on multiple inputs.
On alarm actions include; Alarm Reporting, Record Profile change, Email, Relay Closure (Relay closure on models with relay outputs only)
CMVUVRD720: 2 physical alarm inputs & 1 physical relay output.
AUDIO
CMVUVRD720: 1x audio input (mono) – 3.5mm jack, 47kΩinput impedance, 1x audio ouput (mono) – 3.5mm jack, 47kΩinput impedance
GENERAL SPECIFICATIONS
ENCLOSURE
CMVU720: Zintec case, Cast Zinc lens mount, V0 ABS trim
CMVUD720: Grey ABS. Clear polycarbonate bubble
CMVUVRD720: IP66 Die cast aluminium LM25 Base, Lexan Polycarbonate Bubble
CONNECTIONS
Ethernet: 10/100 BaseT RJ45 Connector PoE
Storage: Micro SD slot for recording. Supplied with 2GB class 4 card.
CMVU720: Secondary Micro SD slot for recording
Power: Terminal Block
CMVUVRD720: Terminal Block for Alarms & Relays
MOUNTING OPTIONS
CMVU720: 1/4” 20 UNC mounts on top and bottom
CMVUD720: Ceiling, Surface (via provided fixings), 3-axis GyroView set up
CMVUVRD720: Surface (via provided fixings), 3-axis GyroView set up
MEASUREMENTS
CMVU720:
123 (L) x 60 (H) x 60 (W) (mm)
CMVUD720: 120 (L) x 120 (W) x 110 (H) (mm)
CMVUVRD720: 148 (L) x 148 (W) x 104 (H) (mm)
WEIGHT
CMVU720: 0.4kg (14oz) without lens CMVUD720: 0.3kg (10.5oz) CMVUVRD720: 1.18kg (41.6oz)
POWER
CMVU720: 12Vdc-24Vac/PoE, Consumption: 4.5W CMVUD720: PoE only, Consumption: 4.5W CMVUVRD720: 12Vdc/PoE, Consumption: 4.5W
POWER OVER ETHERNET
IEEE 802.3-2008. End span and bridging injectors supported.
Supplied with a PoE injector to allow power to be applied to the connecting Ethernet cable without the need for a PoE enabled network switch.
This allows 48V power (supplied seperately) to be provided down the line to the camera on the same cable that is used for data transmission.
9502
ENVIRONMENTAL
Operating Temperature: -10º to +50ºC (14º to 122ºF)
Operating Humidity: 20% to 80% relative humidity, non condensing
Storage Temperature: -10º to +70ºC (14º to 158ºF)
Storage Humidity: 20% to 90% relative humidity, non condensing