Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 122 / 160

122
CamVu 720
Event Search
The Event Search menu allows recorded event images to be quickly searched for and reviewed. The
Search criteria can be limited to a specific date/time and/or individual cameras.
IMPORTANT: The Event Search menu will not be available when the unit is operating in Analog mode.
Note: Event Search will only be available in IP mode when the ‘Enable Event Search Page’ option is
enabled via the System->Features menu.
Event/Page Select the amount of event Stil images (thumbnail size) to be displayed
per results page.
Start Date Enter a Start Date for the Event Search.
Start Time Enter a Start Time for the Event Search.
End Date Enter an End Date for the Event Search.
End Time Enter an End Time for the Event Search.
Cameras Select the camera channel(s) to be included in the Event Search. A
range of cameras can be selected by entering a hyphen between the
first and last required camera i.e.1-8. A selection of individual cameras
can be chosen by entering a comma between each camera i.e. 1,3,5,8.
Events captured by cameras not in this selection will be ignored.
Search (Red) When the Event Search parameters have been entered,
select ‘Search’.