Dedicated Micros CamVu 720, Installation And Configuration Manual, Page: 76 / 160

76
CamVu 720
Live Trans
The unit transmits live images using JPEG or MPEG formats.
The NetVu ObserVer remote viewing software will use the settings configured on this page as the defaults
for JPEG & MPEG; High, Medium and Low settings.
Filter by This will filter the camera category being edited. The resolutions
available for selection will depend on the connected camera type (i.e.
Standard or Megapixel Resolution) and whether Turbo Mode has
been activated via the Profile Record menu (Record Settings->Profile
Record).
Note: The Megapixel Resolution option will only be available if a megapixel camera is connected.
IMPORTANT: There are three classifications of IP camera:
1. Standard Resolution - QCIF,CIF,2CIF,4CIF
2. Standard Resolution (VGA) - VGA,SVGA,QVGA,Q2VGA
3. Megapixel - VGA,SVGA,UXGA,QVGA,Q2VGA,XGA,XGA+,SXGA+,QXGA
The classification of each connected camera channel can be viewed via the CamConfig menu (System
Settings->Status->About->CamConfig).
High LAN/Medium WAN/Low VLBR This shows the transmission settings configured for a High quality
LAN (Local Area Network) connection, Medium quality WAN (Wide
Area Network) connection or a Low quality VLBR (Very Low Bit Rate
connection).