decaWave DW1000, User Manual

Page: 59 / 242

DW1000 User Manual
© Decawave Ltd 2017 Version 2.12 Page 59 of 242
6.3.1 OTP memory map
The OTP memory locations are as defined in Table 10. The OTP memory locations are each 32-bits wide, OTP
addresses are word addresses so each increment of address specifies a different 32-bit word.
Table 10: OTP memory map
OTP
Address
Size
(Used
Bytes)
Byte [3] Byte [2] Byte [1] Byte [0]
Programmed
By
0x000 4
64 bit EUID
(These 64 bits get automatically copied over to
Register File 0x01
:
EUI
on each reset.)
Customer
0x001 4
0x002 4
Alternative 64bit EUID
Customer
0x003 4
0x004 4
40 bit LDOTUNE_CAL
(These 40 bits can be automatically copied over to
Sub Register File 0x28:30 LDOTUNE
on wakeup)
Decawave Test
0x005 1
0x006 4
{“0001,0000,0000“, "CHIP ID (20 bits)"}
Decawave Test
0x007 4
{“0001”“, "LOT ID (28 bits)"}
DecawaveTest
0x008 2 - - V
meas
@ 3.7 V V
meas
@ 3.3 V
DecawaveTest
0x009 1 / 1 - - T
meas
@ Ant Cal T
meas
@ 23 °C
Customer / Deca-
wave Test
0x00A 0 -
Reserved
0x00B 4 - Reserved
0x00C 2 - Reserved
0x00D 4 -
Reserved
0x00E 4 - Reserved
0x00F 4 - Reserved
0x010 4 CH1 TX Power Level PRF 16
Customer
0x011 4 CH1 TX Power Level PRF 64
Customer
0x012 4 CH2 TX Power Level PRF 16 Customer
0x013 4 CH2 TX Power Level PRF 64 Customer
0x014 4 CH3 TX Power Level PRF 16 Customer
0x015 4 CH3 TX Power Level PRF 64
Customer
0x016 4 CH4 TX Power Level PRF 16
Customer
0x017 4 CH4 TX Power Level PRF 64 Customer
0x018 4 CH5 TX Power Level PRF 16 Customer
0x019 4 CH5 TX Power Level PRF 64
Customer
0x01A 4 CH7 TX Power Level PRF 16 Customer
0x01B 4 CH7 TX Power Level PRF 64 Customer
0x01C 4 TX/RX Antenna Delay
– PRF 64
TX/RX Antenna Delay
– PRF 16
Customer
0x01D 0 - - - -
Customer
0x01E 2 - - OTP Revision XTAL_Trim[4:0] Customer
0x01F 0 - - - -
Customer
: : : : : :
Reserved
0x400 4 SR Register (see below) Customer